The QE65000-FL Scientific-grade Spectrometer is a preconfigured combination of detector, optical bench and electronics technologies that provides users with a remarkably sensitive system for demanding low-light level applications such as fluorescence.  The QE65000-FL can achieve up to 90% quantum efficiency with high signal-to-noise and rapid signal processing speed. The QE65000-FL preconfigured spectrometer system is available for $12835.

• Quantum Efficiency to 90%
• Increased System Sensitivity
• Excellent UV Response
• Demanding Low Light-level Applications
• Onboard Programming
• Plug-and-Play USB Operation
• Configuration
• Pricing
• Specifications

New! Optical Bench Enhancements

The great performance of our QE65000-FL Spectrometer has been enhanced to provide even more value: lower stray light, improved efficiency in the UV and Shortwave NIR, and better unit-to-unit reproducibility.

We are also offering a proprietary low BRDF bench coating to improve stray light performance and provide better reproducibility in unit-to-unit performance.

Quantum Efficiency to 90%

The QE65000 is the most sensitive spectrometer we have ever developed. The Hamamatsu FFT-CCD detector used in the QE65000-FL provides 90% quantum efficiency (defined as how efficiently a photon is converted to a photo-electron). Most of our other detectors are linear CCDs but with this “2D” area detector, we can bin (or sum) a vertical row of pixels, which offers significant improvement in the signal-to-noise ratio (>1000:1) and signal processing speed of the detector compared with a linear CCD, where signals are digitally added by an external circuit.

Increased System Sensitivity

In our spectrometers with linear CCDs, the slit’s width, not its height, regulates the amount of light entering the bench because linear CCDs cannot efficiently collect the light from the entire height of the slit. But in the QE65000, the 2D area detector can better take advantage of the height of the slit and the additional light, greatly improving system sensitivity.

Excellent UV Response

Because the detector in the QE65000-FL is back-thinned (or back-illuminated), it has great native response in the UV and does not require the additional coatings that we typically apply to other detectors for UV applications.

Demanding Low Light-level Applications

The QE65000-FL Spectrometer is specifically configured for low-light level applications such as fluorescence. The TE-cooled (down to -15 °C) detector features low noise and low dark signal, which enables low-light-level detection and long integration times (analogous to the shutter speed of a camera) from 8 milliseconds to 15 minutes, with virtually no spectral distortion.

Onboard Programming

The QE65000-FL also has an onboard programmable micro-controller for controlling the spectrometer and accessories. You have access to 10 user-programmable digital inputs/outputs and a pulse generator for triggering other devices. You can use the I/Os to flash a lamp, stop/start a process, and send a message/alarm during the spectrometer’s integration period. The spectrometer’s operating parameters can be controlled through software. In fact, wavelength calibration coefficients unique to each spectrometer are programmed into a memory chip right on the spectrometer.

Plug-and-Play USB Operation

The QE65000-FL interfaces to a computer via USB 2.0 or RS-232 serial port. Data unique to each spectrometer are programmed into a memory chip on the QE65000; our SpectraSuite Spectroscopy Operating Software reads these values for easy setup and hot swapping among computers, whether they run on Linux, Mac or Windows operating systems.

QE65000-FL Configuration

The QE65000-FL is preconfigured with the following, along with SpectraSuite spectrometer operating software and our Annual Service Package (ASP) to extend the warranty from 1 year to 2 years:

Pricing

Specifications